Full Rack System
€ 28.560
DCX Full Rack System Bundle
This bundle is for 24x S19 Antminers or 36x Whatsminers, with 120 kW heat transfer performance and all needed accessories.
A complete Immersion Mining Rack System
Immersion Mining Rack System compatible with Universal Immersion Mining Enclosures is an easy way to mine silently in the most convenient place with low-cost energy access.
With a low 1 sq. meter footprint, 180 cm height, and up to 120 kW capacity, Immersion Mining Rack is the densest immersion system in the world.
3 steel immersion mining enclosures with built-in circulation pump and heat exchanger.
Steel rack frame with maintenance platform.
660 l of ThermaSafe R™ Dielectric Heat Transfer Fluid.
Immersion optimized 120 kW Dry Cooler with adaptive fan control.
Hydraulic manifold with smart circulation pump.
Hydraulic fittings, industrial tubing, sensors, and all needed accessories are packed on one single pallet.
DCX 120 kW Dry cooler for Immersion Rack: space-saving standing or table-top platform with dimensions of 200 x 100 x 500 cm.
Bundle components
DCX Full Rack System Bundle consists of the following products:
3 x DCX Immersion Mining Enclosure
DCX Immersion Mining Enclosure with hydraulic fittings, 88 lpm continuous duty pump (270W | 40dB) and 50 brazed plates heat exchanger for dual loop systems or to connect to home/facility heating or cooling loop. Efficiency: 40kW of heat transfer with 40°C inlet and 60-65°C outlet.
30 x 22 L ThermaSafe R™ Fluid
22 l container of ThermaSafe R™ High-Performance Dielectric Heat Transfer Fluid. Fully synthetic, 5 cSt, flash point: 160°C. No tint, no aroma, non-toxic, non-allergenic, long-life, eco-friendly, crystal clear, and safe. Designed specifically for electronics cooling, compatible with ASIC, GPUs, servers, and electronics equipment.
3 x Enclosure Power distribution switchgear box
3000-4000W switchgear box for 12 miners. Contains: 12 x overcurrent protection, circuit breaker, cable fittings, terminal blocks, cabling. Legrand components.
1 x Single Rack Frame
Single Rack frame to hold 3 Immersion Enclosures and additional components.
1 x Rack Maintenance Platform
Rack maintenance platform for the service of bottom and middle enclosure in rack system. One per multiple racks in one location.
1 x Dry Cooler Loop Filling Assembly (manual pump)
Pressure pump with manometer and all required fittings to perform easy filling and maintenance of primary (Dry Cooler) loop. Allows to fill the connection between enclosures and the Dry Cooler with demineralized water or water/glycol mixtures.
1 x Vertical Rack Manifold (1 or 2 racks)
Rack Manifold – scale out rack manifold with 6 in/out ports with valves and manometer / termomanometer for both supply and return. Mounted on the Immersion Rack frame and optionally equipped with balancing valve. Standard component for scale out installations, used to connect 2 nearby racks to the primary loop.
1 x 120kW SMART rack pumping station (1-2 racks)
A complete rack pump group for 1 or 2 racks. SMART Wilo Yonos MAXO 30/0,5-12 PN10 pump with 11,7 m³/h (195 lpm) power and 12m lifting height; 2″ hydraulic fittings; mounting plate.
1 x 120 kW facility tubing & accessories
Set of complementary accessories and tubing for the local facility connection between the rack system and 120 kW Dry Cooler. 20m of delivery hose (10m distance, more available if needed) with steel spiral reinforcement, designed for hot water mixed with antifreeze fluids. Used for cooling and heating systems, pumps in engines and machines. Working pressure: from 2 bar to 4 bar, depending on the hose diameter. Working temperature: from -40° C to + 120° C. All required AISI 316 steel 2″ hydraulic fittings and connections required to connect Dry cooler to Pump Station.
1 x 120 kW Immersion Optimized Dry Cooler
120 kW Dry Cooler system for the Immersion Rack. Table-top or side mounted platform with dimensions of 2.4 x 1.1 x 0.5m. Over 252 square meters of heat exchange area. Three 62 dB(10m) 500mm (962W) fans. Provides 120 kW of heat transfer in 35°C ambient and over 150kW of heat transfer for average 20-25°C air temperature. Included energy efficient adaptive fan controller with thermostat. Can be delivered with complementary 20M of DN50 2″ tubing, concentrated corrosion inhibitors and biocides and installation services.
2 x 10 L Dielectric Solvent
Dielectric Solvent 10 l – both solvent and cleaner, to remove hydro carbonated heat transfer fluid from electronic components and accessories. Additionally, it can be used as a cleaning fluid to clean all immersion equipment: enclosures, tanks, hoses, pumps, etc from an oil-based fluid. Safe to use for rubber and plastic, and does not contain any hazardous substances.
100 x DCX universal fan emulator 4 pin
Universal 4 pin fan emulator for ASIC miners. Equipped with 16Mhz high speed MCU controller in DIP package with inteligent fan speed emulation 2320-7888 rpm. Fits 99% of ASIC miners and GPU cards using 4pin fan connector.
3 x S19 flow direction plates (4 pieces)
S19 flow direction plates (4 pieces)
